DESCRIPTION:
In the first of 2 videos I make a guitar stand that's simple quick and easy
The ingredients:
OSB, plywood or MDF
Hammerite black hammered finish
https://www.manomano.co.uk/aerosol-paints/hammerite-direct-to-rust-hammered-finish-aerosol-black-400ml-1293979?product_generic_id=1293979&referer_id=684523

A hinge
https://www.manomano.co.uk/furniture-hinge/backflap-hinges-1385304?product_generic_id=1385304&referer_id=684523

Rubber gap seal strip
https://www.manomano.co.uk/door-and-window-draught-seals-and-excluders/fixman-tools-self-adhesive-eva-foam-gap-seal-3-8mm-105m-black-1081556?referer_id=684523
A fashion store bag with rope handle

You will also need a jigsaw with a fine blade(or fret/coping saw)
An electric or hand drill with 8mm and 2mm bits
A screwdriver (PZ2)
Pen and paper
Double sided tape
Sandpaper 40 and 80 grit (and finer if you prefer)

This is the modern equivalent of the jigsaw I was using:
https://www.manomano.co.uk/jigsaw/bosch-gst90be-professional-jigsaw-240v-2371679?referer_id=684523

This is the drill I use:
https://www.manomano.co.uk/drill/sb-18-cordless-brushless-combi-drill-2-x-20ah-li-ion-2431524?referer_id=684523

Check out the restoration of the antique d'Orso guitar you saw in the video:
https://www.youtube.com/playlist?list=PLNZrIoijCmgELrQO4Vpk9yuzYE0ok9BDk